HPI-12S 60/42 Scraping Iron (for the HP-12 Bench Plane) Main Tools Used with softer woods of

Used with softer woods of smaller dimensions

4mm x 16 tpi

023” for StewMac Fret Wire

It is made of A2 tool steel and is ground to a 30° bevel

HPI-12S 60/42 Scraping Iron (for the HP-12 Bench Plane) Main Tools Used with softer woods ofHPI 12S 60 42 Scraping Iron Replacement Blade for HP 12 Dual Angle Block Plane. This robust replacement iron for the HP 12 is made of A2 tool steel and hardened to Rc60 62. It is 0. 225" (5. 7mm) thick and a full two inches wide (50. 8mm). It is ground to 43 degrees with a 5 Degree micro bevel on one end and the other end is a gap toothed scrub iron ground to 25 Degrees with a 5 Degree micro bevel. Mounted in the HP 12 with its 12 Degree bed, the