You 'll want to run chromoly axle shafts in conjunction with this u-joint to achieve the maximum potential
This yoke uses the newer style seal (98 & up)
All the ends you find at the auto parts store use a plastic bushing between the ball and the socket
This is for a PAIR of 3/4" to 1/2" high misalignment spacers that fit a 2" bracket with a 1/2" hole
Yoke, 32 Spline, 1350, U-Bolt, Non-CV, (PM3-4-6211, 3-4-6211) esr3694275 You 'll want to run1350, 32 spline, U bolt yoke. This yoke is typically found or retrofitted onto Atlas and 205 transfer cases. It fits most Advance Adapters outputs (NP231 SYE, D18HD, D20HD, D300HD). It uses U bolts to fasten the u joints instead of straps. WARNING: Count the splines on your transfer case! Not all 205s came with 32 splines! If you're swapping off a yoke with a smaller seal OD, check the OD of the seal below. It will save you some time at the parts