Pusher 3" Intake Manifold with 3" Cross-Air Package for 1998.5-2002 Dodge Cummins Port:Please Select: Fully TIG welded

Fully TIG welded

Mandrel bend 4" tubing Super short run from air filter to turbo Silicone (not rubber coupler) at the turbo connection with full stainless clamps Ties to alternator for a secure connection Designed to work with stock chargers

Please see our complete kit for a "100% bolt on" kit

The Pusher 12v intake manifolds are hydro boost compatible and all Pusher intakes can be used with or without the factory heater grid

Pusher 3" Intake Manifold with 3" Cross-Air Package for 1998.5-2002 Dodge Cummins Port:Please Select: Fully TIG weldedCombine a Pusher 3" Intake Manifold and 3" Cross Air and save $25! This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifold and the air starvation of the rear cylinders. The Cross Air adapts to an existing port at the rear of the intake plenum that is normally sealed off with a freeze plug style fitting from the factory. By splitting off the driver side